| Products- Extrusion(Billet & Logs) | |||||||||||||
| The melting furnace will be made from 10mm thk. MS sheet fabricated and supported with sufficient ribs to | |||||||||||||
strengthen the same. The furnace will be at elevated ht with hydraulic arrangement for tilting. Furnace in side lining |
|||||||||||||
| of 350 mm thick refractory and imported dense castables insulation material. Furnace will be equipped with 2 no of | |||||||||||||
| burners and other required accessories. Furnace will be having 2 no of doors one each for charging of RM and | |||||||||||||
| removal of dross.
The size of furnace will be 3000 x 4500 x 2300mm ht.
Approx. The time estimated for one heat is
|
|||||||||||||
| 3Hr. | |||||||||||||
| Billet Caster | |||||||||||||
| The caster will be operating on a DC method. The caster of dia 140mm, 20nos. Which is having the capacity to | |||||||||||||
| draw logs upto 6000mm in length. The upper die plate will be water cooled to solidify the metal immediately. | |||||||||||||
| The bottom part of the caster which is mounted on the hydraulic cylinder will be slowly moves down as molten | |||||||||||||
| aluminum flows from the upper caster.After the casting process over, the same hydraulic cylinder pushes the log to | |||||||||||||
| up side for unloading. | |||||||||||||
| Billet Cutting |
|||||||||||||
| The log cutting is achieved from the continuous type automatic band saw machine which cuts the logs to | |||||||||||||
| appropriate sizes to be set on the machine The logs are kept on the machine loader and will be fed automatically to | |||||||||||||
| the machine and cut to the desired length. | |||||||||||||
| Homoginization Furnace | |||||||||||||
| Based on the capacity of production the furnace with 10T capacity been proposed.This furnace is working on gas | |||||||||||||
| heating facility. The burners used are IBS, Germany. Furnace would have SS310 baffles and re-circulation fans with | |||||||||||||
| auto reversing facility. The furnace will be bogie hearth type with single bogie | |||||||||||||
| Based on the production capacity the internal clear working space will be approximately 2500 x 1600 x 6500mm l | |||||||||||||
| ength | |||||||||||||
|
|||||||||||||
| :: Site designed by Hans Technologies :: Best viewed at 1024 by 768 resolution. IE. 5.0+ | |||||||||||||
| Home | |
| About Us | |
| Customers | |
| Downloads | |
| Contact Us |
| Contact Information | |
| AARU Founders Divya Jyoti Compound, Gat No - 943/1A/1, Sanaswadi, Dist. Pune, 412 208. Maharashtra, India |
|